How to Make a Cookies for Santa Plate

The Christmas season is a time for family, friends, and of course, Santa. One of the traditions that has become popular in recent years is leaving a plate of cookies out for Santa on Christmas Eve. This is a fun activity for the whole family, and it’s also a great way to show your appreciation for all that Santa does for us.

Here’s how to make your own cookies for Santa plate.

  • Preheat oven to 375 degrees F (190 degrees C)
  • In a small bowl, stir together 1/3 cup of sugar and 1 teaspoon of ground cinnamon
  • Set aside
  • In a large bowl, cream together 1/2 cup of butter or margarine and 1/2 cup of sugar until light and fluffy
  • 5a) Beat in 2 eggs, one at a time, then stir in 1 teaspoon of vanilla extract
  • Sift together 2 cups of all-purpose flour, 1 teaspoon baking powder, and 1/4 teaspoon salt; gradually add to the creamed mixture until just blended
  • 5b) If you want chocolate chip cookies: Stir in 1 – 2 cups of semi-sweet chocolate chips 6) Shape dough into balls about the size of walnuts, and roll them in the cinnamon-sugar mixture
  • Place cookies 2 inches apart on an ungreased cookie sheet, and flatten slightly with the back of a fork dipped in sugar
  • 7) Bake for 8 to 10 minutes in the preheated oven, or until golden brown around the edges
  • Cool on the cookie sheet for a few minutes; remove cookies to wire racks to cool completely

Q: What Supplies Do You Need to Make a Cookies for Santa Plate

One of the most important things you need when making a Cookies for Santa Plate is a plate! You will also need some paint to decorate your plate. You can use any kind of paint you like, but we recommend using non-toxic paint so that it is safe for Santa to eat his cookies off of.

Once you have your supplies, follow these steps: 1. Wash your plate with soap and water to make sure it is clean. 2. Dry your plate off completely.

3. Paint your design onto the plate. We suggest painting a holiday scene or something festive that Santa would love! 4. Once the paint is dry, put some cookies on the plate and leave them out for Santa on Christmas Eve!

Once That Dries, Add a Second Coat of Paint in Your Desired Color

Assuming you are painting a wall in your home: It is generally recommended that you wait at least 24 hours after painting the first coat before adding a second coat. This will give the first coat time to properly dry and cure.

If you paint the second coat too soon, it can end up affecting the final outcome of your project. For best results, use a high-quality paintbrush or roller for applying both coats of paint.

Let the Plate Dry Completely

This can take up to twelve hours. It is important to let your plate dry completely before using it. This can take up to twelve hours.

If you do not let the plate dry, the paint will not adhere properly and your design will be ruined.

Once It’S Dry, Use a Pencil to Lightly Sketch Out Your Design on the Plate

If you’re looking to add a personal touch to your next dinner party, why not try painting your own plates? It’s a fun and easy project that anyone can do, regardless of their artistic ability. Plus, it’s a great way to show off your personality and style.

Here’s everything you need to know about painting plates, from choosing the right materials to creating a beautiful design. Choosing the Right Materials The first step is to select the right type of plate.

Porcelain or ceramic plates are the best options for painting, as they have a smooth surface that’s easy to work with. You’ll also want to make sure that the plates are food-safe and oven-safe, as they may come into contact with food or be placed in the oven during use. Once you’ve selected your plates, gather together some acrylic paint, Brushes (1″ flat brush and smaller round brush), Painter’s tape, Pencil, Water basin and Paper towels.

Creating Your Design Now it’s time to start thinking about your design. What colors will you use?

What kind of pattern do you want to create? Do you want to paint the entire plate or just part of it? Once you have an idea in mind, begin sketching out your design on paper so you can visualize what it will look like before starting on the actual plate.

When you’re ready to start painting, begin by taping off any areas that you don’t want painted. This is especially important if you’re only painting part of the plate. Next, pour some paint into a water basin and dip your 1″ flat brush into it.

Begin stenciling or painting whatever design you’ve chosen onto the plate. If necessary, use the smaller round brush for more detailed work or for touching up any areas where paint has gone outside of the lines. Allow your paint to dry completely before moving on to the next step.

We Used Dots for Our Design, But Feel Free to Get Creative! Once You Have Your Design Sketched Out, Use White Paint to Fill in the Design

If you want to get creative with your pumpkin this year, why not try painting it? You can use any design you like – we went for a dotty pattern, but you could go for stripes, spots or anything else that takes your fancy. Just make sure to sketch out your design beforehand so you know where to paint.

To paint your pumpkin, start by using white paint to fill in the areas of your design. Once the white paint is dry, you can then add in any other colours you want to use. We went for black and orange dots, but again, feel free to get creative with your colour scheme.

Once your pumpkin is all painted, leave it to dry completely before putting it on display. And that’s all there is to it! A painted pumpkin makes a great addition to any Halloween display, and it’s also a lot of fun to create.

So why not give it a try this year?

You May Need to Let the Paint Dry in between Coats

How many coats of paint should you apply? The general rule is two to three coats, but this varies based on the type of paint, the color and the previous surface. One coat may be all that’s necessary for a fresh coat of white paint on new drywall in good condition.

Two coats are often required when painting over a dark or bright color with a light one, or when painting over an unpainted surface like bare wood or Masonite. Three coats may be needed when using a highly pigmented semitransparent stain on new wood.

Finally, Once the Paint is Dry, Bake the Plate According to the Package Directions

When it comes to painted ceramics, the key is to make sure the paint is dry before you bake it. Otherwise, your hard work will be for nothing and the paint will just come right off. Once the paint is dry, bake the plate according to the package directions.

This will set the paint and make your creation dishwasher safe.

This Will Help Set the Design So That It Doesn’T Come off When You Wash It Later

Setting your design with a heat press will help ensure that it doesn’t come off when you wash it later. Heat pressing uses heat and pressure to bond the ink to the fabric, resulting in a durable and long-lasting design. You’ll want to use a teflon sheet to protect your design and prevent it from sticking to the press.

Be sure to preheat your garment before pressing, and use moderate pressure for 10-15 seconds. Once you’ve pressed your design, let it cool completely before peeling off the teflon sheet. Your design is now set and ready to withstand regular washing!

Q: Can I Put Any Type of Cookie on My Santa Plate

A: While there are no hard and fast rules about what kind of cookies you can put on your Santa plate, generally speaking, it’s best to stick to traditional Christmas cookies. That means sugar cookies, gingerbread cookies, shortbread cookies, and the like. Of course, if you have a family favorite cookie that isn’t traditionally associated with Christmas, feel free to include it on your plate!

Just Be Sure That Whatever Cookie You Choose is Big Enough to Fit on Your Plate Without Touching the Edge Too Much (You Don’T Want Your Cookies Getting Stuck!)

You’re right, you don’t want your cookies getting stuck! But how do you know if a cookie is too big or not? Here are a few tips:

-A good rule of thumb is that the cookie should be about the size of your palm. If it’s any bigger, it might be difficult to eat without making a mess. -Another way to tell if a cookie is too big is by looking at the edges.

If the edges are touching the plate, then it’s probably too big.

How to make a Cookies for Santa Plate and Milk mug – Creative fabrica design


Santa’s on his way, and he’s going to be hungry! What better way to show your holiday spirit than by leaving a plate of homemade cookies out for him? This blog post shows you how to make a special “cookies for Santa” plate, complete with a festive design.

All you need is a plain white plate, some paint, and a little bit of creativity. Just follow the simple instructions and you’ll have a one-of-a-kind plate that Santa is sure to love.

Leave a Comment

Your email address will not be published. Required fields are marked *